kind of one-com ponent ,low viscosity U V structural adhesive . This
product in wavelength for 200-400 nm of uv radiation can be fast curing, after curing
transparent, not bleaching. This product belongs to softness formula .It has e xcellent
resistance to impact and resistance to moisture performance .It is applicable for various
plastic materials bonding.
Properties Uncured
Item Typical Value Range Test Standard
Appearance Light amber transparent liquid
Chemical type urethane acrylate
Viscosity (mPa.s@25 °C ) 350 0- 8 0 00 GB/T2794-1995
Density (g/cm3) 1.0 8 1.0 5 -1.1 2 GB/T13354-1992
Tack free (s) 3
Curing depth (mm@30s) 3.5
Completely curing energy > 1200mJ/cm2
Physical Properties Typical Value Test Standard
Hardness ( Shore D ) 55 GB/T2411-1980
Tensile strength (MPa)
MMA/MMA >14
MMA/Glass > 14
Elongation at break ( % ) 120 GB 1040-1992
Work temperature ( °C ) -50-1 5 0
Electric Properties Typical Value Test Standard
Dielectric constant (1MHz) 5.0 GB/T1693-2007
Dielectric loss (1MHz) 0.0 3 GB/T1693-2007
Dielectric strength (KV/mm) 2 4 GB1410-1989
Volume resistivity ( Ω .cm) 8 × 10 (15) GB1410-1989
Instructions Use
The Surface to be bonded should be clean and dry.
Spread the adhesive onto the surface to be bonded.
Exposed to UV light measured @ 365nm , make sure the material to be bonded is light
transmittable.
Curing rate is dependent on UV light intensity, distance form light source, and curing time.
Close the lid as soon as finish the operation. Spread the glue with black container, keep
way from daylight, UV light and artificial lighting.
Notice
Keep far away from children.
U se at well ventilated place is recommoned .
In case of contact with skin, rinse with soap water immediately. If contact with eyes, rinse
with a plenty of clean water immediately and go to the hospital for an examination .
For further information, please refer to MSDS.
Package
1KG/tube
Storage
Store at 8 - 28 °C , keep away from light and moisture.
Shelf life : 12 months.
