|
|
Rapid Clear Epoxy Adhesive Acrylic Resin Glue Epoxy Resin Hardener Ab Glue
Collect
NO PUR adhesive
epoxy resin adhesive is clear, low ordor, none solvent, two part, with gel time of 30mins, full cure time of 24 hours @ room temperature. Operates in a mix ratio of 1:1 by volume. It works on a variety of substrates including metals, ceramics and glass, wood, and many other materials. Particularly suited to applications requiring resistant to harsh environmens e.g. oils, gasolines, acid, and dry heat. When using a size adhesive, rely on dispensing equipment for convenient and accurate metering, mixing and dispensing. Product Features 1. High quality 100% modified epoxy resin; 2. High viscosity but with low ordor; 3. Environment friendly; 4. Excellent performance of water-proof, oil-resistant, and acid-resistant; 5. Cure can be accelarated with heat; 6. Good chemical and environmental resistance; 7. Suitable for bonding different kinds of materials. Technical Data Sheet Model MTB DP-302 Mix Ratio 1:1 by Volume Lowest Temperature Resistance -10℃ Highest Temperature Resistance 90℃ Gel Time 30mins Full Cure Time 24h Shelf Life 12 months Instruction 1. Materials to be bonded should be properly surface treated and be free from contaminants. 2. Use a standard “square back” 50ml cartridge dispensing gun, with the gun you can get the best and most consisent mixing performance. 3. Place cartridge into applicator, remove cap. 4. Dispense and discard a small amount of adhesive to ensure even ratio and free flow. 5. Apply adhesive to clean surfaces, joint part, secure until surface sets (60 minutes @25 ℃（77℉）). 6. Clear orifice if necessary. 7. Store at cool and dry place 21℃（70℉）or below.
Related
|
