| I. Gas Analyzer Pre-Filtration Consumables (for SIGMA/Rehm Oxygen Analyzer) |
|
|
|
|
|
|
| 1 | 29.9358 | Analyzer Filter Tube (Activated Carbon) | VXS/VXP/K/R/C/S Full Series | Pre-purification of reflow soldering flue gas sampling, adsorb flux VOC, oil and gas, organic impurities, protect analyzer sensor | Transparent acrylic tube, 6mm quick-connect fittings at both ends, built-in columnar activated carbon, max temperature ≤80℃ | 29.9358 China-made compatible replacement, ERSA same model filter tube, BTU universal filter tube |
| 2 | 29.9246 | Precision Filter Element (White PTFE) | VXS/VXP Series Oxygen Analyzer | Filter rosin dust and particulate matter in flue gas, prevent blockage of analyzer gas path | Threaded interface, filtration accuracy 0.2μm, PTFE material, resistant to organic solvent corrosion | 29.9246 China-made replacement, GF2600 small filter element, SIGMA original filter element |
| 3 | 29.9247 | High-Flow Filter Element | K Series High-Flow Flue Gas Analyzer | Particulate filtration in high-concentration flue gas scenarios, extend sensor service life | High-flow design, filtration accuracy 0.5μm, max temperature 120℃, stainless steel support mesh | GF2800 high-flow filter element, 29.9247 compatible replacement, ERSA same model filter element |
| 4 | 29.9359 | Desiccant Filter Tube (Silica Gel) | Full Series Oxygen Analyzer | Adsorb moisture in flue gas, avoid humidity interference with oxygen concentration detection accuracy | Transparent tube, built-in color-changing silica gel desiccant, intuitive saturation observation, 6mm quick-connect fittings | 29.9359 China-made drying tube, molecular sieve drying filter element, universal gas drying tube |
| 5 | 29.9360 | Molecular Sieve Filter Tube | Vacuum Reflow Oven Oxygen Analyzer | Deeply adsorb trace moisture and CO₂, adapt to high-precision oxygen detection in vacuum environment | 3A molecular sieve filler, low dew point adsorption, max negative pressure -0.1MPa, 6mm quick-connect fittings | 29.9360 compatible replacement, vacuum dedicated drying tube, SIGMA original part |
| 6 | 29.9361 | Vacuum Oxygen Analyzer Filter Element | R Series Vacuum Reflow Oven | High-precision filtration for oxygen sampling in vacuum environment, intercept trace dust and oil stains | Sintered metal mesh material, filtration accuracy 0.1μm, max negative pressure -0.1MPa, max temperature 200℃ | 29.9361 China-made vacuum filter element, vacuum dedicated analysis filter element |
| 7 | 29.9362 | Cold Trap Filter Element | Vacuum Reflow Oven Flux Recovery System | Deep filtration of flux in low-temperature condensation environment, intercept gaseous rosin condensate | Copper mesh + glass fiber composite material, min temperature -40℃, max temperature 200℃, compatible with original cold trap | 29.9362 China-made cold trap filter element, condensation filter screen, ERSA same model cold trap filter element |
| 8 | 29.9363 | Flow Control Valve | Analyzer Sampling System | Adjust flue gas sampling flow, ensure stability of detection data, adapt to different working conditions | Brass + PTFE material, flow adjustment range 0~10L/min, compatible with 6mm quick-connect fittings | China-made same specification flow control valve, needle valve, pneumatic flow control valve |
| 9 | RE-4207.0514 | Filter Housing Assembly | Full Series Analyzer Gas Path | Fix the pre-filtration module, protect the internal filter element, support multi-filter combination | 6061 aluminum alloy material, anodized treatment, compatible with 6mm quick-connect fittings, modular design | China-made same specification aluminum alloy filter housing, multi-channel filtration module |
| 10 | RE-4215.0202 | Filter Fitting Assembly | Full Series Analyzer Sampling Pipeline | Gas path pipeline transfer and sealing, adapt to different specifications of sampling tubes and filter elements | PTFE + stainless steel material, resistant to organic solvent corrosion, quick-connect design, compatible with 4/6/8mm pipelines | Same specification pneumatic quick-connect fitting, ferrule fitting, solvent-resistant adapter |
| 11 | RE-4215.0203 | Check Valve | Analyzer Sampling Pipeline | Prevent flue gas backflow, avoid contamination of sampling pipeline and analyzer, ensure one-way gas flow | Stainless steel + PTFE material, opening pressure 0.05MPa, compatible with 6mm pipeline, temperature range -20~120℃ | China-made same specification pneumatic check valve, non-return valve, solvent-resistant check valve |
| II. Flux Recovery System Filters/Cartridges |
|
|
|
|
|
|
| 12 | 25.6653 | Square Folded Flux Filter | VXS 925/935/945/955, VXP Series | Filter rosin flux in reflow oven chamber, intercept liquid/solid rosin residue, protect condenser | 305×315×70mm, stainless steel mesh + glass fiber composite material, max temperature 280℃, filtration accuracy 10μm | 25.6653 China-made replacement, RE-1400.0038 knitted filter, BTU same model filter |
| 13 | 28.4161 | Thickened Flux Filter | K Series, R Series, C Series High-End Models | Enhanced filtration in high-capacity and high-flux usage scenarios, extend cleaning cycle | Thickened 50mm filter layer, double-layer stainless steel mesh support, max temperature 300℃, filtration accuracy 5μm | 28.4161 compatible replacement, custom thickened filter, ERSA same model filter |
| 14 | RE-1400.0038 | Knitted Flux Filter | Full Series VXS/VXP/S Series | Primary filtration of flux in large-scale circulating air in furnace chamber, intercept large particle rosin | 305×315×70mm, aramid knitted fabric material, max temperature 260℃, air permeability ≥800L/m²·s | 25.6653/28.4161 interchangeable, China-made aramid knitted filter cotton |
| 15 | 25.6654 | Inlet Air Filter Panel | Full Series VXS/VXP/K/R/C/S Models | Primary filtration of reflow oven inlet air, intercept external dust and particulate matter, protect furnace chamber cleanliness | Panel filter, size 595×595×21mm, G4 filtration grade, max temperature 180℃ | 25.6654 China-made replacement, same specification panel primary filter, HVAC inlet air filter |
| 16 | 25.6655 | Circulation Air Filter | Full Series Hot Air Circulation Models | Secondary filtration of furnace chamber circulating air, intercept fine rosin particles and dust, ensure welding cleanliness | Bag/panel filter, F8 filtration grade, max temperature 200℃, filtration accuracy 1μm | 25.6655 China-made medium efficiency filter, HEPA high efficiency filter, ERSA same model circulating filter |
| 17 | 28.4162 | Vacuum Furnace Filter Element | R Series Vacuum Reflow Oven | Filter flue gas and flux in vacuum environment, adapt to negative pressure working conditions, prevent pump contamination | Metal mesh + glass fiber composite material, max negative pressure -0.095MPa, max temperature 250℃, filtration accuracy 0.5μm | 28.4162 China-made vacuum filter element, vacuum pump inlet filter element, Busch vacuum pump filter element |
| 18 | RE-1400.0039 | Exhaust Air Filter | Full Series Exhaust System | Terminal filtration of furnace exhaust, intercept residual flux and dust, reduce environmental protection emissions | Panel structure, M5 filtration grade, max temperature 180℃, size 495×495×15mm | China-made exhaust filter, same specification primary filter cotton, environmental protection dedicated exhaust filter |
| 19 | RE-1030642 | Filter Fixing Bracket | VXS 945/935/925 Models | Install and fix the filter in the furnace chamber, prevent the filter from shifting and deforming, ensure the filter surface fits | 304 stainless steel material, bent and formed, compatible with original installation holes, surface polished | China-made same specification fixing bracket, stainless steel filter bracket, custom bent parts |
| 20 | RE-1030646 | Filter Press Plate | Full Series Flux Filtration Module | Compress the filter, ensure the filter surface fits completely, prevent flue gas bypass | 304 stainless steel material, used with fixing bracket, anti-slip tooth design, compatible with original filter size | China-made same specification press plate, buckle, stainless steel compression strip |
| 21 | 27.2007 | High-Temperature Seal Strip | Full Series Flux Recovery System | Seal the filter module and condenser, prevent flue gas leakage, ensure stable system negative pressure | Silicone + glass fiber material, temperature range -40℃~300℃, size 10×10mm, self-adhesive design | 27.2007 China-made replacement, same specification high-temperature seal strip, glass fiber silicone seal strip |
| 22 | 27.2008 | Insulation Filter Cotton | Furnace Chamber Insulation Layer Supporting | Both insulation and primary filtration functions, intercept large particle foreign matter, protect heating module | Aluminum silicate fiber material, max temperature 1200℃, thickness 20mm, density 128kg/m³ | China-made aluminum silicate insulation cotton, ceramic fiber cotton, high temperature resistant insulation cotton |
| III. Heating System Consumables |
|
|
|
|
|
|
| 23 | 25.1234 | Heating Element (Ceramic) | VXS/VXP Series Furnace Heating Module | Core heating component of furnace chamber, provide stable high-temperature heat source, adapt to reflow soldering temperature curve | Ceramic packaging, power 2000W/3000W, voltage 380V, max temperature 400℃, service life ≥10000h | China-made same specification ceramic heating tube, thick film heating element, ERSA same model heating core |
| 24 | 25.1235 | Infrared Heating Lamp | K Series, C Series Infrared Heating Models | Infrared radiation heating, fast temperature rise, adapt to rapid temperature change requirements of lead-free reflow soldering | Quartz glass tube, infrared coating, power 1500W, voltage 220V, wavelength 2~10μm | China-made infrared heating lamp, quartz heating tube, halogen heating tube |
| 25 | 25.1236 | Heating Tube (Stainless Steel) | Full Series Hot Air Circulation Heating Module | Hot air circulation system heating, cooperate with fan to realize uniform temperature control in furnace chamber | 304 stainless steel material, power 1000W/1500W, voltage 380V, max temperature 350℃ | China-made stainless steel heating tube, finned heating tube, hot air circulation heating element |
| 26 | RE-1020345 | Temperature Controller | Full Series Temperature Control System | Accurate temperature control of furnace chamber, support multi-section temperature curve setting, PID self-tuning | Omron/Delta original chip, temperature control accuracy ±1℃, support 485 communication, compatible with Rehm original program | China-made same specification temperature controller, PID temperature controller, multi-channel temperature control module |
| 27 | 25.1237 | Thermocouple (K-Type) | Full Series Furnace Temperature Detection | Real-time sampling of furnace chamber temperature, feedback to temperature controller, realize closed-loop temperature control | K-type armored thermocouple, temperature range 0~400℃, accuracy ±0.5℃, compatible with original installation size | China-made K-type thermocouple, armored thermocouple, temperature measuring wire, ERSA same model thermocouple |
| 28 | 25.1238 | Overheat Protection Thermostat | Full Series Heating System | Overheat protection of furnace chamber, automatically cut off heating when exceeding set temperature, prevent equipment damage | Mechanical thermostat, action temperature 350℃, automatic reset, compatible with original heating module | China-made same specification overheat protector, temperature control switch, temperature fuse |
| IV. Conveyor System Consumables |
|
|
|
|
|
|
| 29 | 25.2345 | Conveyor Chain | VXS/VXP/K Series Mesh Belt Conveyor Models | PCB board conveying in furnace, adapt to mesh belt transmission system, tensile resistance, high temperature resistance | 304 stainless steel material, pitch 12.7mm, custom width, max temperature 300℃, ultimate tensile strength ≥5000N | China-made same specification conveyor chain, stainless steel chain, mesh belt chain, BTU same model chain |
| 30 | 25.2346 | Mesh Belt | Full Series Mesh Belt Conveyor Models | Carry PCB board to convey uniformly in furnace, high temperature resistance, anti-deformation | 316L stainless steel material, mesh hole 2×2mm, width 300/400/500mm, max temperature 350℃, service life ≥5000h | China-made stainless steel mesh belt, high temperature resistant mesh belt, ERSA same model mesh belt, custom mesh belt |
| 31 | 25.2347 | Sprocket | Full Series Mesh Belt Transmission System | Chain transmission meshing, transmit power, ensure uniform operation of mesh belt | 304 stainless steel material, 17/25/30 teeth, compatible with chain pitch 12.7mm, surface quenching treatment | China-made same specification sprocket, stainless steel sprocket, gear, transmission sprocket |
| 32 | RE-1030456 | Conveyor Motor | Full Series Conveyor System | Power source for mesh belt transmission, provide stable and uniform conveying power, support speed regulation | SEW/ABB original motor, power 0.75KW/1.5KW, voltage 380V, variable frequency speed regulation, compatible with original installation position | China-made same specification geared motor, variable frequency motor, conveyor motor, speed regulating motor |
| 33 | 25.2348 | Guide Rail | Full Series Mesh Belt Conveyor Models | Mesh belt operation guidance, prevent mesh belt deviation and wear, ensure conveying accuracy | 304 stainless steel material, linear/arc guide rail, compatible with mesh belt width, surface polished | China-made same specification guide rail, stainless steel guide rail, conveyor guide rail, custom guide rail |
| 34 | 25.2349 | Bearing | Full Series Transmission Drum, Sprocket | Support transmission components, reduce wear, ensure smooth operation of transmission system | High temperature resistant bearing, model 6205/6206, P0 grade accuracy, max temperature 200℃, lubricating grease adapted to high temperature environment | China-made same specification high temperature resistant bearing, deep groove ball bearing, transmission bearing, SKF/FAG bearing |
| V. Vacuum System Consumables |
|
|
|
|
|
|
| 35 | 28.4163 | Vacuum Pump Inlet Filter | Full Series Vacuum Reflow Oven | Filter at vacuum pump inlet, intercept flux and dust extracted from furnace chamber, protect vacuum pump blades | Folded glass fiber filter element, max temperature 200℃, compatible with Busch/Edwards/Rietschle vacuum pumps, filtration accuracy 0.3μm | 0532140201/0532140202 vacuum pump filter element, China-made vacuum pump inlet filter element |
| 36 | 28.4164 | Vacuum Pump Exhaust Filter | Full Series Vacuum Reflow Oven | Filter at vacuum pump exhaust, intercept oil mist and residual dust, reduce environmental protection emissions, protect workshop environment | Oil mist separation filter element, filtration accuracy 0.1μm, compatible with vacuum pump exhaust, max temperature 150℃ | China-made vacuum pump exhaust filter element, oil mist separator, exhaust filter |
| 37 | 28.4165 | Vacuum Pump Oil | Full Series Vacuum Pump | Lubrication, sealing and cooling of vacuum pump, ensure ultimate vacuum degree of vacuum pump, extend equipment life | Mineral oil/synthetic oil, model VG46/VG68, compatible with Busch/Edwards vacuum pumps, max temperature 100℃ | China-made same specification vacuum pump oil, synthetic vacuum pump oil, Busch original vacuum pump oil |
| 38 | RE-1030647 | Vacuum Filter Housing | Vacuum Furnace Gas Path System | Install and fix filter element in vacuum environment, ensure gas path sealing, adapt to negative pressure working conditions | 304 stainless steel material, welded and formed, max negative pressure -0.1MPa, compatible with 6mm quick-connect fittings, modular design | China-made same specification vacuum filter housing, stainless steel vacuum filtration module |
| 39 | 28.4166 | Vacuum Gate Valve | Vacuum Furnace Gas Path System | Control on-off of vacuum pipeline, ensure sealing of vacuum environment, adapt to high negative pressure working conditions | 304 stainless steel material, manual/pneumatic control, nominal diameter DN15/DN20, max negative pressure -0.1MPa, max temperature 200℃ | China-made same specification vacuum gate valve, vacuum ball valve, vacuum butterfly valve, high vacuum valve |
| 40 | 28.4167 | Vacuum Seal Gasket | Vacuum Furnace Chamber, Pipeline | Seal vacuum system, prevent air leakage, ensure ultimate vacuum degree | Copper/aluminum material, max temperature 200℃, compatible with original flange size, sealing precision 10^-9 Pa·m³/s | China-made same specification vacuum seal gasket, oxygen-free copper gasket, aluminum gasket, vacuum flange seal |
| VI. Cooling System Consumables |
|
|
|
|
|
|
| 41 | 25.3456 | Cooling Water Pipe | Full Series Flux Recovery System, Vacuum Furnace | Cooling water circuit of condenser and vacuum pump, circulating cooling water, ensure condensation/cooling effect | 304 stainless steel material, outer diameter 6/8/10mm, wall thickness 1mm, max temperature 100℃, water pressure resistance 1MPa | China-made same specification cooling water pipe, stainless steel water pipe, copper pipe, high pressure resistant water pipe |
| 42 | 25.3457 | Radiator | Full Series Cooling System | Cool cooling water, ensure stable circulating water temperature, adapt to continuous production of reflow oven | Aluminum fin radiator, heat dissipation area 0.5/1.0/2.0㎡, compatible with cooling water flow 5~20L/min | China-made same specification radiator, aluminum radiator, water cooling radiator, custom radiator |
| 43 | RE-1040567 | Cooling Water Pump | Full Series Cooling System | Power for cooling water circulation, ensure stable water circuit flow, adapt to cooling system requirements | Grundfos/Wilo original water pump, power 0.37KW/0.75KW, flow rate 10~30L/min, head 15~30m | China-made same specification water pump, circulating water pump, booster pump, stainless steel water pump |
| 44 | 25.3458 | Temperature Control Valve | Cooling System Water Temperature | Automatically adjust cooling water temperature, ensure stable condensation/cooling temperature, adapt to process requirements | Self-operated temperature control valve, temperature control range 0~100℃, accuracy ±2℃, compatible with DN15/DN20 pipeline | China-made same specification temperature control valve, self-operated temperature regulating valve, electric temperature control valve |
| 45 | 25.3459 | Water Filter | Full Series Cooling System | Filter cooling water, intercept impurities and scale in water, prevent pipeline blockage, protect water pump | Stainless steel mesh filter element, filtration accuracy 50μm, compatible with 6/8/10mm pipeline, water pressure resistance 1MPa | China-made same specification water filter, water filter element, pipeline filter, pre-filter |
| VII. Sensor/Electrical System Consumables |
|
|
|
|
|
|
| 46 | 25.4567 | Oxygen Sensor | Full Series Oxygen Analyzer, Vacuum Furnace | Real-time detection of oxygen concentration in furnace chamber, feedback to control system, realize precise control of oxygen content | Electrochemical/zirconia sensor, range 0~100%VOL, accuracy ±0.1%, service life ≥20000h | China-made same specification oxygen sensor, zirconia sensor, electrochemical oxygen sensor, SIGMA original sensor |
| 47 | 25.4568 | Proximity Switch | Full Series Conveyor System, Oven Door | Position detection and limit control, mesh belt in-place, oven door switch detection, signal feedback | Schneider/Omron original proximity switch, detection distance 10mm, NPN/PNP output, voltage 24V DC | China-made same specification proximity switch, photoelectric switch, limit switch, sensor |
| 48 | 25.4569 | Photoelectric Sensor | Full Series PCB Detection, Conveyor System | PCB board presence detection, counting and positioning, adapt to reflow oven board in/out detection | Diffuse reflection/through-beam photoelectric sensor, detection distance 0~500mm, voltage 24V DC, NPN/PNP output | China-made same specification photoelectric sensor, photoelectric switch, diffuse reflection sensor, through-beam sensor |
| 49 | RE-1050678 | Inverter | Full Series Conveyor, Fan System | Motor speed regulation, realize precise control of mesh belt speed and fan air volume, energy saving and consumption reduction | Schneider/Delta original inverter, power 0.75KW/1.5KW/2.2KW, voltage 380V, compatible with original motor | China-made same specification inverter, variable frequency drive, motor inverter, fan inverter |
| 50 | 25.4570 | PLC Controller | Full Series Equipment Control System | Core logic control of equipment, temperature zone control, conveyor control, fault alarm, data recording | Delta/Keyence series PLC, compatible with Rehm original program, support multi-module expansion | China-made same specification PLC controller, programmable logic controller, industrial PLC |
| VIII. Sealing System Full Range Consumables |
|
|
|
|
|
|
| 51 | 27.2009 | O-Ring Seal Gasket | Full Series Filters, Fittings, Valves | Seal gas path, water path and vacuum system, prevent air leakage, liquid leakage and oil leakage | Nitrile rubber/fluororubber material, temperature range -30℃~200℃, size compatible with adapted model, resistant to organic solvent corrosion | Same specification solvent-resistant O-ring, seal gasket, fluororubber O-ring, nitrile rubber O-ring |
| 52 | 27.2010 | Shaft Seal | Full Series Motors, Pumps, Transmission Drums | Rotating shaft seal, prevent lubricating oil leakage and external impurities from entering, protect bearings | Mechanical seal/skeleton oil seal, material nitrile rubber/fluororubber, compatible with shaft diameter 12/15/20mm, max temperature 180℃ | China-made same specification shaft seal, mechanical seal, skeleton oil seal, rotary seal |
| 53 | 27.2011 | Flange Seal Gasket | Full Series Pipelines, Valves, Cavities | Flange connection seal, ensure sealing performance of pipelines and cavities, prevent leakage | Asbestos/non-asbestos/metal wound gasket, max temperature 300℃, water pressure resistance 2MPa, compatible with DN15/DN20/DN25 flanges | China-made same specification flange gasket, seal gasket, metal wound gasket, non-asbestos gasket |
| 54 | 27.2012 | Door Seal Strip | Full Series Reflow Oven Door | Seal when oven door is closed, prevent flue gas leakage and heat loss, ensure stable temperature zone in furnace chamber | Silicone + glass fiber material, temperature range -40℃~300℃, size 20×15mm, self-adhesive design, compatible with original oven door size | 27.2012 China-made replacement, oven door seal strip, high temperature resistant seal strip, silicone seal strip |
| IX. Cleaning/Maintenance Consumables |
|
|
|
|
|
|
| 55 | 25.6656 | Filter Cleaning Tool Kit | Full Series Flux Filters | Special tool for filter disassembly and cleaning, including scraper, brush, pry bar, compatible with original filter size | Stainless steel + nylon material, 4-piece tool set, compatible with all Rehm models, high temperature resistant design | China-made same specification cleaning tool set, filter scraper, cleaning brush, disassembly tool |
| 56 | 25.6657 | Nozzle Cleaning Pin | Full Series Flux Recovery System, Cooling System | Clean nozzle and pipeline blockage, dredge flux nozzle and cooling water nozzle, ensure stable flow | Stainless steel material, diameter 0.5/0.8/1.0mm, length 100mm, compatible with original nozzle aperture | China-made same specification cleaning pin, through pin, nozzle dredging pin, stainless steel cleaning pin |
| 57 | 25.6658 | High-Temperature Lubricating Grease | Full Series Transmission System, Bearings | High temperature lubrication of chains, sprockets, bearings and guide rails, reduce wear and extend component life | Synthetic high temperature lubricating grease, temperature range -40℃~300℃, dropping point 350℃, adapted to high temperature working conditions | China-made same specification high temperature lubricating grease, high temperature resistant butter, chain lubricating grease, bearing lubricating grease |
| 58 | RE-1060789 | Maintenance Kit | VXS/VXP/K Series Full Models | Complete set of consumables for annual equipment maintenance, including filter, filter element, seal strip, lubricating grease, cleaning tool | Original supporting maintenance kit, compatible with corresponding model, complete set of wearing parts, support customized combination | China-made same specification maintenance kit, customized maintenance set, equipment maintenance package, wearing parts set |
| 59 | 25.6659 | Flux Residue Cleaner | Full Series Furnace Chamber, Filters, Pipelines | Clean flux residue inside furnace chamber, filter and pipeline, quickly dissolve rosin residue | Environmental friendly cleaner, halogen-free, fast drying without residue, adapted to high temperature working conditions, no damage to equipment materials | China-made same specification flux cleaner, environmental friendly cleaner, rosin cleaner, furnace chamber cleaner |
| 60 | 25.6660 | Anti-Static Cleaning Cloth | Full Series Equipment Maintenance | Clean equipment surface, PCB board and furnace chamber interior, anti-static, no lint, adapted to electronic manufacturing scenarios | Microfiber material, anti-static level 10^6~10^9Ω, no lint, strong water absorption, reusable | China-made same specification anti-static cleaning cloth, dust-free cloth, microfiber cleaning cloth, anti-static rag |
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews