|
|
Red Plastic SMT Solder Paste UV Curing Plastic Bonding Adhesives For Posts 30CC
Collect
NO PSW812
PRODUCT DESCRIPTION Red Plastic SMT Solder Paste UV Curing Plastic Bonding Adhesives For Posts 30CC
Packaging & Delivery Packaging Details 200g/bottle; 360g/bottle Delivery Time Shipped in 5 days after payment PY36G is one component epoxy adhesive and a kind of heat cured adhesive. It designed for stencil printing . High bonding strength, high humidity ,high intensity,excellent electrical performance and good storage stability.
Typical Usage Mainly used for the bonding of the mounted components on SMT.
Properties Uncured
Curing Condition Recommended 90-120s at 120°C. 60-90s at 150°C The product will obtain to higher bonding strength when higher curing temperature and longer cured time . the figure curve is the recommended curing temperature and heating rate,Underthe corresponding temperature ,components need the time when they achieve good bonding strength. Users can set the curing furnace’s temperature parameters according to the solidified characteristic curve of the glue and the heat efficiency of the Reflow Ovens
Performance After Cured (Cured for 30min@150°C)
Physical Property
Direction For Use The product should be recovered to room temperature before use, don't open the aluminum foil package before recovered to room temperature(the recovering time of 300ml packaging at least 2-4 hours). The product should be used at 25°C , The glue viscosity will decline under the higher temperature, which influence printing effect; High humidity can increase the glue of moisture absorption which shorten the opening hours of the glue and influence the glue bonding strength. This product opening time is 48 hours at 25 °C,55% Rh. Suggest to print at the speed of 20-150 mm/s; Drawknife pressure is 3-4 N/cm (Afer scraping, sheet should be clean, and avoid producing wire drawing); the deviating speed from the sheet is 0.1-3.0 mm/s. Not cured adhesive which is stick on line wires can be erased with acetone or propylene alcohol ethers. Please seal and chill when not using up the glue.
Application Process
Notice Keep away from children. The workshop should be adequate ventilation. Wash with soapy water if on skin. Wash with a lot of soapy water and then go for doctor if in eyes. For more information, please refer to MSDS.
SMT red plastic 120-150 degree curing adhesive for posts 30CC
Notice of Shadowless traceless fast dry UV curable glue / adhesive1. Make sure the glass is clean and dry. 2. In order to ensure the stability of product, blow the glass surface make sure it is dry without moisture, in winter construction 3. The product is irritated to eye and skin. Thoroughly flush the eyes with water at least 20 minutes, and seek medical attention, if splashed in eyes incaution Our Services Professional service
Repair services
Top quality
Packaging 1. Carton box/ wooden case/ package according to the customer' s required. 2. The packaging is very safe and strong, We guarantee that the product will be delivered to you in good condition.
Shipping 1. We will send the products to your designated place by FedEx/ UPS/ DHL/ EMS in time. 2. If you need to use it urgently, we can also arrange air and sea transportation for you to ensure the safe and timely delivery of the goods to your hands.
if you have any special needs Please notify us right now!
FAQ: Q:How long is your delivery time? A: We`ve cooperation with Fedex, TNT and DHL. It is shipped directly from Shenzhen. The time is fast. If it is in stock, it is usually 3 days. If there is no stock, it is calculated by quantity.
Q: How about our spare parts quality? A: We`ve been doing exportation to Europe and USA for years , quality is the premier factor we concern.
Q.Why choose PY? PRODUCT DETAILS
相关商品
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
