PRODUCT DESCRIPTION
TOP8820N SMT Assembly Equipment Automatic 10 zones lead free reflow oven
Specifications
1. Environment friendly
2. Energy saving
3. Brand-new design ,built with quality
4. Simple operation
5. Good after-sale service
GSD-L10 Lead Free Reflow Oven
| ITEMS | SPECIFICATIONS |
| Control system | PC+PLC |
| Heating/cooling | 20 heating zone 2 cooling zone |
| Heating zone length | 3250mm |
| Temperature range | Room temperature-350°C |
| Temperature accuracy | ±1°C |
| Three temperature | ±2°C |
| Cooling | Forced cooling (patented cooling system) |
| PCB size | 50(W)-400mm(W) |
| A high degree of PCB transfer | 900±20mm |
| Transmission | Chain rail&mesh belt |
| Transmission direction | L→R(R→L) |
| Transmission speed | 0-2000mm/min adjustable |
| Wide range of track notes | 50-500mm |
| Net width | 460mm |
| Power failure protection | UPS |
| Power supply | A3ø380V 50HZ |
| Normal working power/total power consumption | 6/82KW |
| Dimensions(l*w*h) | 5800mm(L)*1500mm(W)*1550mm(H) |
| Weight | 2250KG |
Features:
l windows operating interface is adopted and two control methods,including PC control and emergency manual control, are designed to ensure the safety of the device.
l The advanced way of heating solves the problem of the dead angle that may arise when reflow soldering.
l Professional wind wheel design with stable blowing speed which effectively avoids evenness of the wind when PCB is being heated.so as to achieve a most efficient reheating.
l Regions of different temperature adopt the circulation independent from each other,with independent PID control and up/down heating method method,so as to ensure the accurate and even temperature of the furnace and large thermal capacity.
l The heating preservation layer adopts quality aluminum silicate heat preserving material,with good preservation effect and high heating-up speed.It takes 20min to heat up working temperature from room temperature.
l Quality high-temperature high-speed motor is running stably with light vibration and low noise
l The furnace is jacked by cylinder and supported by safety rod to ensure safety and convenience.
l The PCB is conveyed non-level with changed frequency and speed and synchronous grid and chain to ensure great stability.
l Special quality aluminum alloy guide rail is adopted and auto fuel feeding system ensures the debugging accuracy of the guild rail as well as its use life.
l UPS function is equipped to ensure normal output of PCB after power break and avoid damage.
l The software has powerful function.It can measure the temperature of the PCB online and can analyze ,save and print the data and curve from time to time.
l PC and PLC adopts PC/PP protocol to communication with each other which ensures stable working and avoids system down.Auto detecting and showing working status of the device.
l Enforced air cooling ;PCB temperature≤60°C.
l Special furnace liner design ,with good heat preservation ability and low power consumption.
Product features:
The machine adopts heating method of imported heating board with even temperature and high heat compensation efficency,is especially suitable for sold of BGA CSP components.
The patent wind wheel design can ensure wind speed wind speed can be adjusted by frequency conversion.
All temperature zone apply coercive didependent cycles PID controls and up and down heating style,which make the temperature of the oven accurate with large heat capacity.
The heating is quick,it takes less than 30 minutes ti heat from the normal temperature to the working temperature.
Power by the imported high temperature high speed motor with high quality,hot wind created is stable with no vibration and noise.
The upper cover of the oven is raised by electric handspike,safe and credibie.
The inphase parallel conveyor of chains and mesh which adopts step less speed regulating.
The track are made of special aluminum alloy with high rigidity accuracy and intensitymauto chain lubrican filling system.
UPS power off protection function which ensures the normal output of PCB board without damage after the power is off.
Powerful programming software’s controlling system, It can detect the online temperature of PCB and can analysis,save and type the
data curves.
MODBUS protocol is adopted in PC and PLC communication works stably without system halting.
Automatically monitoring and displaying the working condition of the oven the parameter of the oven can be modified at any moment.
Special solder design, best temperature saving, lowest power consumption in the same field.
Compel water cooling quick and even, the speed can be controled by frequency conversion, no temperature rebound which makes
soldered point smooth and shining.
The nitrogen flowmeter enable you to know the nitrogen flux anytime.
Quickly extracting oxygen and charging with nitrogen which can provide high purity nitrogen easily.
Vertical nitrogen anti leak technology to prevent the leaking of nitrogen.
Model TOP7720N TOP8820N TOP1020N
Heating part of the parameters
Heating Zone Top7/Bottom7 Top8 /Bottom8 Top10/Bottom10
Heating Zone Length 2625mm 3000mm 3750mm
Cooling Zone Quantity Top2/Bottom2
Conveyor System
Max Width Of PCB Rail type 400mmMesh belt type 450mm
Rail Adjustment Range 50-400mm
Conveyor Direction L→R(R→L)
Fixation Type Of Rail Front Rail Fixed(Option:Rear Rail Fixed)
Conveyor Height Mesh 880±20mm,Chain900±20mm
Conveyor Type Chaim+Mesh
Conveyor Speed 300-2000mm/Min
Controlling System
Power 3 Phase 5 Wores(380V 50/60Hz)
Power Of Start Up 38Kw 45Kw 58Kw
Operation Approx.10Kw Approx.12Kw Approx.15Kw
Heat-Up Time About 20 min
range Of Temperature Control Room Temper ature-350℃
Temperature Control Full computer PID closed - loop control, SSR drive
Temperature Control LCD PC+PLC
Temperature Control Accurcy ±1℃
Temperature Distributing Error PCB ±1-2℃
Cooling Method Standard:Forced-Air Type(Option:Water-Chiller)
Abnormal Alarm AbnormalTemperature (Extra-high/Extra-Low Temp)
Board Dropped Alarm Tower Light:Yellow Warming;Green-Normal;Red-Abnormal
Machine Size & Weight
Approx Weight Approx.2000Kg Approx.2200Kg Approx.2500Kg
Dimension(mm)L×W×H L49000×W1400×H1600 L5200×W1400×H1600 L6000×W1400×H1600
Exhaust Volume 10 cubic / min 2 channel 180MM
Nitrogen parts
Nitrogen system(RFN-820) /Nitrogen flux:20-30m3/hour Oxygen density:500-800ppm
External water-cooling system Power:3P Cooling Speed:≥6℃sec
Our Services
Professional service
PY will offer you the most favorable new and second-hand SMT machines and accessories to provide comprehensive and first-class after-sales service.
Repair services
Professional technicians protect the quality of products.
Quality guaranteed period is offered after repair service.
Top quality
PY will repay the trust of new and old customers with the most superior quality products, the most cost-effective price and the most complete technical support.
Packaging
1. Carton box/ wooden case/ package according to the customer' s required.
2. The packaging is very safe and strong, We guarantee that the product will be delivered to you in good condition.
Shipping
1. We will send the products to your designated place by FedEx/ UPS/ DHL/ EMS in time.
2. If you need to use it urgently, we can also arrange air and sea transportation for you to ensure the safe and timely delivery of the goods to your hands.
if you have any special needs Please notify us right now!
FAQ:
Q:How long is your delivery time?
A: We`ve cooperation with Fedex, TNT and DHL. It is shipped directly from Shenzhen. The time is fast. If it is in stock, it is usually 3 days. If there is no stock, it is calculated by quantity.
Q: How about our spare parts quality?
A: We`ve been doing exportation to Europe and USA for years , quality is the premier factor we concern.
Q.Why choose PY?
A: High quality products with reasonable price, quick shipping.
B: Good technical training and technical support
C: Professional international business communication and support
D: Professional options for international transport
E: Reliablebrands supplier.
