PRODUCT DESCRIPTION
ASM Siemens 00142031-04 Siemens S Series Vibrating Feeder.
Other parts:
| 00316577-03 | CUTTER |
| 00316584-01 | SUPPORT ANGLE |
| 00316585-01 | SUPPORT ANGLE |
| 00316588-02 | Plate |
| 00316590-02 | COVER |
| 00316593-01 | MAGNET |
| 00316601-03 | CONTROL UNIT TAPE CUTTER SIPLAC E |
| 00316602-01 | TOOTHED BELT SYNCHROFLEX 10 AT3 |
| 00316671-01 | NOZZLE SMD-SWITCH SOKO |
| 00316673-01 | NOZZLE FOR SMD-SENSOR |
| 00316747-04 | COVER TAPE FOR ENERGY CHAIN F4 F5 |
| 00316751-05 | COVER TAPE |
| 00316753S02 | CABLE DUCT PLASTIC 80S |
| 00316756S02 | ENERGY CHAIN 80F |
| 00316767-01 | INRUSH CURRENT LIMITER 3-POLE 110V |
| 00316784-02 | MAGAZINE LONG W10,5/H5,1/O-L12 |
| 00316791-01 | SLIDING PLATE |
| 00316802-01 | COMP.MAGAZINE LONG TRANSFORMER SC-1 |
| 00316805-02 | MAGAZINE LONG SOJ32 |
| 00316823-03 | LP illumination camera UP |
| 00316831-01 | MICRO SWITCH V4N T7 / V4N-Serie |
| 00317167-01 | DIN 125-A 1.7-140HV-A2 |
| 00317195-01 | Micro fuse 6.3x32 / T 10 A / glass |
| 00317212-01 | PCB-HOLD-DOWN ANGLE |
| 00317216-01 | STEPPING MOTOR PC-BOARD |
| 00317234-02 | COMP.-MAGAZINE LONG SOP10 |
| 00317235-02 | COMP.MAGAZINE LONG SOP14 HIGH |
| 00317236-02 | BE-Magazin long SOP16 |
| 00317279-01 | DOCKUNG UNIT (BOLTS) FOR CHANGE TABLE |
| 00317310-02 | COMP.MAGAZINE LONG SOCKET PLCC44 W23,8 |
| 00317349-01 | Miniature ball bearing 3x8x3 RV 308X |
| 00317351S01 | Seeger V-Ring JV 28 |
| 00317353S02 | CONTROL UNIT NOZZLE CHANGER |
| 00317517-01 | SENTRONIK PRESSURE REGULATING VALVE WITH SILENCER |
| 00317545-02 | NOZZLE (SPECIAL VERSION) FOR TY PE 5xx |
| 00317564-02 | COMP.MAGAZINE LONG W10,2 H4,2 LE7 |
| 00317578S02 | VALVE 5/2 M5 1,5 bar-7,5 bar |
| 00317579-02 | CABLE:TERMINAL BOARD-NOZZLE CHANGER |
| 00317596-01 | BEARING BUSH |
| 00317665-01 | AMPLIFIER HOLDER (small) |
| 00317675-03 | SLIDE UNIT RIGHT SIDE FIXED |
| 00317676-03 | SIDE PART:f,long |
| 00317677-03 | SIDE PANEL "b" |
| 00317678-04 | HOLDING-DOWN DEVICE RIGHT |
| 00317679-04 | RETAINER - LEFT SIDE "b" |
| 00317680-03 | ROCKING LEVER RIGHT |
| 00317681-03 | ROCKING LEVER LEFT |
| 00317682-01 | HOLDER |
| 00317684-01 | BEARING AXIS |
| 00317690-01 | ADJUSTING SPENDEL |
| 00317696-03 | SPINDLE NUT FLANGE |
| 00317711-01 | TOOTHED BELT SYNCHROFLEX 10 T2, 5/230 |
| 00317730-01 | PRESSURE SPRING 1,2*13*57,7 V2A |
| 00317731-01 | LOCTITE ADHESIVE 638 20s FOR APPLICATION HEAD |
| 00317782-01 | TOOTHED BELT SYNCHROFLEX 16T5/455 |
| 00317785-03 | SYNCHRONIZING GEAR 2 Al T5/Z70 |
| 00317789-01 | BUILT IN ELEMENT LEL 71001A |
| 00317792-01 | BALL BEARING HOUSING |
| 00317848-01 | ANGLE PLATE FOR CUTTING UNIT 80F |
| 00317856-02 | FRICTION BLOCK HOLDER |
| 00317859-04 | FRICTION BLOCK |
| 00317861-03 | PLATE |
| 00317868-01 | COMPRESSION SPRING 0,8*8,8*21,5 |
| 00317883-03 | CABLE: STOPPER |
| 00317885-03 | CABLE: STOPPER |
| 00317887S04 | MOTOR LIFTING TABLE Voltage: 70V/DC Watt: 86W Dual Phase |
| 00317888-02 | CONTROL UNIT HANDLING |
| 00317889-02 | STEPPING MOTOR PC-BOARD |
| 00317890-02 | STEPPING MOTOR PC-BOARD (POWER) |
| 00317891-01 | STEPPING MOTOR CONTROL UNIT |
| 00317892-03 | SWITCH FOR LIFTING TABLE |
| 00317898-01 | BOLT Type B i/a-M3x9-ST chrom |
| 00317901-01 | STAR GRIP |
| 00317941S03 | AXLE FOR BELT GUIDE S15 |
| 00317963-03 | CONTACT METAL RIGHT SIDE |
| 00317964-03 | CONTACT METALL LEFT |
| 00317973-02 | NOZZLE FOR PLUG-SPRING |
| 00318002S01 | IC-vacuum nozzle magazine complete |
| 00318028-01 | CABLE SET FOR ILLUMINATION CONTROL IUII |
| 00318030S01 | Cable: Camera Comp./Flip-Chip-V ision |
| 00318131-02 | FENT FOR HANDLING |
| 00318197-01 | SAFETY VARNISH RED |
| 00318199-01 | locking varnisch grey |
| 00318270-02 | RETROFIT KIT NOZZLE CH. COLL. <(>&<)> PLACE H. |
| 00318290-03 | REPAIR KIT FOR IC-HEAD |
| 00318323-02 | COMPONENT-MAGAZINE LONG W7,6/H3,2/O-L5,0 |
| 00318324-02 | COMPONENT-MAGAZINE SO8/WIDE |
| 00318352-02 | NOZZLE TYPE 614, SOKO FERRIT WITHOUT CRDL-CONTROL |
| 00318355-01 |
|
| 00318370S01 | Vacuum Jet |
| 00318541-01 | Loctite adhesive |
| 00318549-01 | TOOTHED BELT SYNCHROFLEX 12ATS5/280 |
| 00318551S03 | Sevenfold Tube PK-3, Black 4 meter |
| 00318552-04 | Gear for X-Axis |
| 00318553-04 | Motor for X-Axis Voltage: 65V/DC Watt: 140W Single Phase |
| 00318557-03 | TOOTHED BELT 28 ATS 5/1655 SZ |
| 00318567S01 | Portal SIPLACE 80/ S4 |
| 00318588-02 | VACUUM NOZZLE |
| 00318600S01 | MOUNT FOR APPLICATION HEAD SIPLACE 4 |
| 00318601-03 | Cover X-cable trail.unit for 7-fold tube |
00142031-04 picture:
Our Services
Professional service
PY will offer you the most favorable new and second-hand SMT machines and accessories to provide comprehensive and first-class after-sales service.
Repair services
Professional technicians protect the quality of products.
Quality guaranteed period is offered after repair service.
Top quality
PY will repay the trust of new and old customers with the most superior quality products, the most cost-effective price and the most complete technical support.
Packaging
1. Carton box/ wooden case/ package according to the customer' s required.
2. The packaging is very safe and strong, We guarantee that the product will be delivered to you in good condition.
Shipping
1. We will send the products to your designated place by FedEx/ UPS/ DHL/ EMS in time.
2. If you need to use it urgently, we can also arrange air and sea transportation for you to ensure the safe and timely delivery of the goods to your hands.
if you have any special needs Please notify us right now!
FAQ:
Q:How long is your delivery time?
A: We`ve cooperation with Fedex, TNT and DHL. It is shipped directly from Shenzhen. The time is fast. If it is in stock, it is usually 3 days. If there is no stock, it is calculated by quantity.
Q: How about our spare parts quality?
A: We`ve been doing exportation to Europe and USA for years , quality is the premier factor we concern.
Q.Why choose PY?
A: High quality products with reasonable price, quick shipping.
B: Good technical training and technical support
C: Professional international business communication and support
D: Professional options for international transport
E: Reliablebrands supplier.
Tags:
