PRODUCT DESCRIPTION
UNIVERSAL CASE N210153998AB SMT Replacement Parts ,SMT Accessories Series.
Others:
| 41152901 | COVER,LEFT | 42968801 | CAP,END R-.600 |
| 41152903 | COVER,LEFT | 42972401 | CAP,L,LEFT |
| 41153001 | COVER RIGHT | 42972902 | PC CD,HPWR SERVO ASM,ABH |
| 41153003 | COVER,RIGHT | 42978101 | TUBING,FLEXIBLE |
| 41156502 | CYL, VALVE ASSY | 42983401 | TUBING,FLEXIBLE |
| 41156502 | VALVE,AIR | 42983408 | FITTING,BRANCH TEE |
| 41158403 | HOUSING,PICK-UP | 42984001 | FITTING,STRAIGHT UNION |
| 41162502 | ROD,VACUUM | 42984004 | FITTING,STRAIGHT UNION |
| 41166101 | BUSHING,BALL BEARING | 42984006 | FITTING,STRAIGHT UNION |
| 41170001 | CYLINDER AIR | 42993301 | SPRING,COMPRESSION |
| 41177301 | CABLE GUIDE | 42993603 | SHIM |
| 41184103 | IBP MANUAL4618A | 42993703 | SHIM |
| 446-04-002 | SLIDE (CORPO CENTRALE PORTA CUCK) |
| 446-04-005 | SPRING PAWL |
| 446-04-016 | SPRING COMPRESSION CHUCK SFERA |
| 446-04-017 | SPRING COMPRESSION CHUCK LUNGA |
| 446-04-018 | SPRING EXTENSION CHUCK PAWL |
| 446-04-03R | CHUCK PAWL DX SINGOLO VC5 |
| 446-05-002 | TAPE CLAMP(CLIP PALLET CORTI PL.) |
| 446-05-006 | TORSION SPRING (MOLLE CLIP PALLET) |
| 446-08-13B | LEVER (STAFFA INF TAGLIO CARTA TDK) |
| 446-08-16D | LEAD WIRE CUTTER LOWER (TAGL. CARTA INF) |
| 446-08-16U | LEAD WIRE CUTTER UPPER (TAGL, CARTA SUP) |
| 446-09-015 | SHAFT PER CLINCH TDK |
| 446-09-029 | PISTON TDK |
| 446-09-030 | NUT ROT FIL REG TAGLIO PIEGA CLINCH TDK |
| 446-09-150 | SHAFT CLINCH TDK |
| 446-10-036 | CLAMP (FRENO PUSHER) |
| 446-10-123 | SPRING EXT (MOLLA 0/90° TESTA TDK) |
| 446-1E-05L | LINK L (PORTA CUSHION PIN L) |
| 446-1E-05R | LINK R (PORTA CUSHION PIN R) |
| 446-1E-309 | CUSHION PIN (PERNO MAIN GUIDE) |
| 446-1E-310 | CUSHION SPRING (MOLLA PERNI MAIN GUIDE) |
| 446-1E-31R | PUSH ROD (TESTA IN GOMMA) |
| 446-1G-121 | CHUCK BODY (CENTRALE CHUCK TDK) |
| 446-1G-123 | PAWL GHEAD |
| 446-1G-212 | LEAD HOLDER (LEVETTA CENTRATORE TDK)TESTINA |
| 446-E-0313 | TDK VC4/5 PASSO 5mm. |
| 446-lE-307 | LINK PIN (PERNO FERMA PUSHER) |
| 556-05-006 | SPRING (MOLLE CLIP) |
| 556-07-002 | PALLET GUIDE(BASE PLASTICA PALLET) |
| 556-07-012 | TENSIONG SPRING (MOLLE X PALLET) |
| 556-07-067 | CUTTER BASE (TAGLIENTE FISSO TESTE TDK) |
| 556-07-068 | TAPE CUTTER (COLTELLO TESTE TDK) |
| 556-07-153 | TAPE CLAMP (CLIP PALLET LUNGHE) |
| 556-1G-123 | CHUCK PAWL L (DOPPIO) |
| 556-30-226 | CENTRATORE COMPONENTE CHUCK/PALLET VC5 |
| 556-B-0420 | PUSH ROD (PUSHER) |
| 556-B-0440 | PUSH ROD PIECE (GOMMINO) |
| 556-B-0451 | LINK PORTA CUSHION PIN SX 7 |
| 556-B-0461 | LINK PORTA CUSHION PIN DX 7 |
| 556-B-2350 | CLAMP (FRENO TDK) |
| 556-B-2360 | CLAMP PIECE (PATTINO FRENO TDK) |
| 556-B-2360 | CLAMP PIECE (PATTINO FRENO TDK) |
| 556-B-2361 | CLAMP PIECE (PAD IN NILON) |
| 556-E-0300 | GUIDE TDK |
| 556-E-0311 | G MAIN GUIDE |
| 556-E-0313 | TESTINA TDK VC4/5 PASS0 5mm. |
| 556-E-0320 | SUB GUIDE TDK AUX SINGOLO |
| 556-E-1660 | E SUB GUIDE UNIT R VC7 |
| 556-E-1860 | E SUB GUIDE UNIT R 7 |
| 556-E-310 | SUB GUIDE TDK L |
| 556-G-0311 | G MAIN GUIDE |
| 556-G-0313 | G MAIN GUIDE TDK |
| 556-G-0320 | MAIN GUIDE TDK |
| 556-G-0340 | SUB GUIDE UNIT AUX DOPPIO TDK |
| 556-G-0342 | SUB GUIDE UNIT TDK |
| 556-G-1620 | SUB GUIDE L (DOPPIA PER VC7) |
| 556-G-1690 | G SUB GUIDE LH (DOPPIA SALTINO) |
| 556-G-1810 | G MAIN GUIDE 7 |
| 556-G-1890 | E SUB GUIDE UNITL 7 |
| 556-N-0032 | BENDING CUTTER TDK SINGOLO |
| 556-N-0042 | BENDING CUTTER TDK DOPPIO |
| 556-N-0093 | BRACKET HOLDER TDK |
| 556-N-0094 | BRACKET HOLDER TDK |
| 556-N-0110 | DETECTING TERMINAL TDK DOPPIO |
| 556-N-0120 | DETECTING TERMINAL TDK SINGOLO |
| 556-N-1012 | CUTTER PROPER TDK |
| 556-N-1026 | CUTTER COVER TDK |
| 556-N-1032 | BENDING CUTTER TDK N30 DOPPIO |
| 556-N-1042 | BENDING CUTTER TDK N30 SINGOLO |
| 556-N-2010 | CUTTER PROPER N60 DOPPIO |
| 556-N-2020 | CUTTER COVER N60 SINGOLO |
| 556-N-2030 | BENDING CUTTER 1A N60 SINGOLO |
| 556-N-2040 | BENDING CUTTER 2A N60 DOPPIO |
| 556-N-2050 | PIN A PERNO BENDING CUTTER N60 |
| 556-N-5000 | DETECTING CABLE ASM |
| 556-T-0070 | LINK TDK |
| 556-U-1000 | BLOCK BASE CLINCH N60 |
| 556-U-1020 | BRCHET SUPPORTI LAT X LINK N60 |
| 556-U-1040 | VITE CENTRALE CLINCH TDK |
| 556-U-1050 | PIN PER CLINCH TDK |
| 556-U-1060 | PIN FOR CLINCH TDK LINK |
| 556-U-1070 | PIN (C) LUNGO |
| 556-U-1090 | DUST CHUTE (TUBETTO CLINCH TDK N30/60) |
| 556-U-1092 | DUST CHUTE TUBETTI SCARICO |
| 556-W-5081 | HEXAGON BOLTHEAD (VITE CLICH SHAFT N60) |
| 556-W-6041 | LINK BASE BENDING CUTTER N6O |
| 55630226 | CENTRATORE COMPONENTE CUCK/PALLET VC5 |
| 561-J-8000 | ALIGNMENT CTRG KIT 2.5/5mm.TDK |
| 562-H-1370 | PUSH ROD PIECE |
| 562-F-990 | LEAD HODER (CENTRATORE VC7) |
| 562-F-1011 | LEAD GUIDE(CENTRATORE VC7) |
| 562-P-0060 | SWING ARM UNIT PALLET TDK VC7 |
| 562-P-0090 | BASE PALLET TDK VC7A-B |
| 600-35-202 | GUIDE RAIL LARGE (GUIDE RULL.TESTA TDK) |
| 600-35-206 | GUIDE RAIL (RULLINI GUIDE FRENO) |
Our Services
Professional service
PY will offer you the most favorable new and second-hand SMT machines and accessories to provide comprehensive and first-class after-sales service.
Repair services
Professional technicians protect the quality of products.
Quality guaranteed period is offered after repair service.
Top quality
PY will repay the trust of new and old customers with the most superior quality products, the most cost-effective price and the most complete technical support.
Packaging
1. Carton box/ wooden case/ package according to the customer' s required.
2. The packaging is very safe and strong, We guarantee that the product will be delivered to you in good condition.
Shipping
1. We will send the products to your designated place by FedEx/ UPS/ DHL/ EMS in time.
2. If you need to use it urgently, we can also arrange air and sea transportation for you to ensure the safe and timely delivery of the goods to your hands.
if you have any special needs Please notify us right now!
FAQ:
Q:How long is your delivery time?
A: We`ve cooperation with Fedex, TNT and DHL. It is shipped directly from Shenzhen. The time is fast. If it is in stock, it is usually 3 days. If there is no stock, it is calculated by quantity.
Q: How about our spare parts quality?
A: We`ve been doing exportation to Europe and USA for years , quality is the premier factor we concern.
Q.Why choose PY?
A: High quality products with reasonable price, quick shipping.
B: Good technical training and technical support
C: Professional international business communication and support
D: Professional options for international transport
E: Reliablebrands supplier.
Tags:
